Hi Venkata Subramanian
You said Revenue flow to COPA it is flow when you crate the SO (Incoming SO record type A) up to this their is no error.
when you running the VA88 settlement it is not settling any value to COPA it means some configuration is messing please check it
1) were you assign the PA transfer stricture in settlement profile or not
2) were configure settlement profile correctly
settlement profile --> Requirement Class --> Requirement type --> SO type --> SO
Reg...
Naga Mahendra
Hi All,
I am working proxy to SOAP API synchronous interface, here we are using two authentications, one is ApiAccessToken and another one basic authentication (user,pwd)
ApiAccessToken: we are sending saop header level(its part of the wsdl structure)
basic authentication i configured in CC module tab(pls check screenshot below)
when i tried to test the interface , i am getting error in receiver channel : An error occurred when verifying security for the message
even i tried in SOAP UI tool , initially i was getting same error there..but when i changed the WSS-password type as PasswordText then its working fine.
please let me why that error is coming..
here is the Receiver channel config:
Note: Even i have imported server certificatein NWA
Thanks and Regards,
Maheswara
Hi all,
I have an invoice report with the following conditions:
- company logo and footer on every page (page header and page footer)
- terms and conditions on the last page(s) (the terms and conditions can last one or more pages)
- no logo and no footer should be printed on the pages where the terms and conditions are printed
My problem:
How can I suppress the company logo and footer when the terms and conditions are printed? The t&c can last more then one page, so I can't use the pagenumber.
Do you have any idea how to handle this?
Thank you very much.
Best regards
Markus
Hi Murali,
Even by using 2 new condition types in your pricing procedure, u can achieve this.
Capture the 40% of the base price to one new condition type.
Capture the 75% of base price to the other new condition type.
use them as the base for your tax and service tax calculation (use 'from ' column in pri procedure).
Regards
Jobi
Hi Harshad,
You need approval Procedure for this??
if yes, please activate approval procedure by using below query
SELECT Distinct 'True' where $[$5.0.0] in ('V10000')
Note: Please give correct BP Code instead of V10000.
You may need to activate approval procedure in Administration > System initialization > general Settings > BP tab > Activate Approval Procedures
Thanks
Unnikrishnan
Many Thanks Gab, for the follow-up and actions.
Much appreciated mate. Sure will wait for it.
Cheers,
Vinod
Hi Alejandro,
This will be the ERP document Type, you will maintain the Pricing procedure and Condition Type in "External Pricing" BC Configuration.
Regards,
Bejoy
Hi Saravanan,
If infoobjects are customized one then there is not such table for this. In case of custom datasource, whoever created/modified that data source will have some information what are corresponding fields in BW.
Thanks
Nilesh
Hi,
We have a custom program in ECC.
This program uses an excel as input & works fine in foreground.
However, since the runtime is too long (due to the amount of data provided), we've incorporated an export import function to run it in the background.
However, for the complete dataset, it dumps in the background:
Category External Error
Runtime Errors EXPORT_BUFFER_NO_MEMORY
Except. CX_SY_EXPORT_BUFFER_NO_MEMORY
Date and Time 06/09/2015 16:10:10
Short Text
The EXPORT data cluster is too large for the application buffer.
What happened?
Resource bottleneck
The current program "Z***" had to be terminated
because
a capacity limit has been reached.
Dev_w* says:
***LOG BYE=> invalid interface parameter obj_l [dbexpbuf 1535]
*** ERROR => dbexpbuf[EXP_SHM]: Invalid object size 2787324 in db_exp_load(); must be between 1 and 858624
*objId_p=(INDX,(27)'201XYZREF ')
[dbexpbuf.c 1538]
The EXPORT data cluster is too large for the application buffer..
rsdb/obj/buffersize is: 209715
rsdb/obj/max_objects is: 52429
If I use the formula in Note 520684 for rsdb/obj/buffersize, the value comes upto < the current value !
Also, the value 858624 (dev_w*) is not set for any parameter in the system.
Please help advise which parameter needs to be tweaked or if its something to do with the program maybe ?
Thanks a lot !
saba.
So that leaves with second question now? That how to segregrate mulitple values within same tag. I think I may have to opt of UDF or Java mapping for this.
Any other options plz?
Hi Guys - I know this is an old post. I had the same problem but could not able to resolve with the previous suggestions:
This was the error:
CJS-30149 ABAP processes of instance SID/DVEBMGS00 [ABAP: MSNOTRUNNING] did not start after 10:10 minutes. Giving up.
FCO-00011 The step startMessageServerInstance with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|startMessageServerInstance was executed with status ERROR ( Last error reported by the step: ABAP processes of instance SID/DVEBMGS00 [ABAP: MSNOTRUNNING] did not start after 10:10 minutes. Giving up.).
Solution: Profile parameter <em>rdisp/msserv_internal</em> is not set for instance DVEBMGS00/AGD on host zct2agd02. <p> SOLUTION: Set the parameter in the default profile and restart the instance.
rdisp/msserv_internal = 3901
Hope it helps!!
I have copy F110_D_AVIS.
Now check this advise with my regup table data. Is there any need of this payment document starts from 2, to be in advise?
Hi Mofizur,
You have given me some things to look at thanks.
We do have a SAP incident logged.
This program seems to have only one version and also seems to be some sort of system generated program. The version date is also quite recent which is really strange. This program is also not able to be changed by the customer and since it seems to affect the running of other programs I personally wouldn't want to change it. I get the same error if I try to run RADDBDIF manually.
Version Information:
Versions: Report Source Code SAPLSTFI
Version Cat Fla SAP Rel. Arch Request Project Date Time Author
Version(s) in the development database:
activ X 700 23.01.2015 09:54:06 SAP
There are no versions in the version database.
Thanks for you input.
Kind regards,
Keith Webb.
Hi Van,
It did work, as you said. just append both structures.
Just want to add our analysis.
We find that when we are adding a field of type D, P, X we are not getting Data even for one Table. For e.g. ISEG table, when we are excluding posting date which is of field type D we are getting Data but once we are adding it, we are getting "No data Selected"
Hi Thomas,
It is really difficult to understand what you are saying ... so as per my understanding if we do t code LT23 we get the screen below 
Now after this it is not clear what is your requirement , be precise and ask exactly.
Regards,
Arnab
Estimado Javier, saludos.
Quisiera saber, qué sucede cuando se instala DTW en Windows Server 2012, en el cual no se encuentran esas carpetas, ya que WS2012 utiliza .Net Framework 4.5 y no 4.0.
Tengo este error, pero veo que la nota no aplica para Windows Server 2012.
Agradezco tu ayuda.
Saludos.
With out JAVA stack Web-reporting tools are not work.
Thanks & Regards,
Surendra